Image Archive

The Thompson crane moving the Benthic Experiment Platform from the aft deck to the ROPOS launch area, prior to deployment at Oregon Offshore (600 m depth). Credit: Rhea Sanders, Oregon State University

Seafloor cable RS01W9 and strain relief carabiners connected to the low-voltage node LV01C at the EOffshore site, 600 meters deep.Photo Credit: UW/NSF-OOI/CSSF, ROPOS Dive 1744, V14.

ROPOS connecting the P2 end of seafloor cable RS01W9 into the J1 port on LV01C. RS01W9 runs between PN1C and LV01C at the Endurance Offshore site, 600 meters deep. Photo Credit: NSF-OOI/UW/CSSF, Dive 1744, V14

Primary Node PN1C 1 km from the Oregon Offshore site ais home to numerous crabs. Credit: UW/NSF-OOI/CSSF, ROPOS Dive 1743, V14.

Clearing cable RS01W9 away from ROPOS ROCLS cable laying system during installation in 2014 at the Offshore site, prior to the cable lay. Credit: UW/NSF-OOI/CSSF, ROPSO Dive 1743, V14.

A Brisingid sea star (possibly Novodinia pacifica?) encountered during a cable lay survey at the Oregon Offshore site, 600 m water depth. Credit: UW/NSF-OOI/CSSF, ROPOS Dive 1743, V14.

A sunstar (Solaster) encountered during a cable lay survey at the Oregon Offshore site, 600 meters water depth. Credit: UW/NSF-OOI/CSSF, ROPOS Dive 1743, V14.

A large Grooved Tanner crab and a sole (flatfish) seen during a cable lay survey at the Oregon Offshore site, 600 meters water depth. Credit: UW/NSF-OOI/CSSF, ROPOS Dive 1743, V14.

Closeup of a Blacktail Snailfish (Careproctus melanurus) encountered during a cable lay survey at the Oregon Offshore site, 600 m water depth. Credit: UW/NSF-OOI/CSSF, ROPOS Dive R1743, V14.

A Deepsea sole (Embassichthys bathybius) encountered during a cable lay survey at the Oregon Offshore site, 600 m water depth. Credit: UW/NSF-OOI/CSSF, ROPOS Dive 1743, V14.

A Blacktail Snailfish (Careproctus melanurus) observed during the survey prior to laying cable RS01W9 at the Endurance Offshore site. Photo Credit: NSF-OOI/UW/CSSF, Dive R1743, V14

A Deepsea sole (Embassichthys bathybius) observed during the survey prior to laying cable RS01W9 at the Endurance Offshore site. Photo Credit: NSF-OOI/UW/CSSF, Dive R1743, V14

Primary node PN1C at Endurance Offshore was deployed in a trawl-resistant frame, including doors over the connection points. ROPOS cut through the straps and opened the doors in preparation for laying cable RS01W9 from PN1C to LV01C. Photo Credit: NSF-OOI/UW/CSSF, Dive R1743, V14

The equipment and instruments to be deployed at Endurance Offshore and Slope Base during Leg 3 of VISIONS 14. Photo Credit: Skip Denny, APL-UW

The Deep Profiler at Axial Base docked in its charging station at the bottom of the mooring. The yellow profiler vehicle climbs up and down the mooring wire between the seafloor and the top buoy, collecting oceanographic data on thin layers in the water column. Photo Credit: NSF-OOI/UW/CSSF, Dive 1742, VISIONS14

All Axial Base seafloor infrastructure is now connected to Primary Node PN3A. Photo Credit: NSF-OOI/UW/CSSF, Dive 1742, V14

An octopus hanging out next to primary node PN3A at Axial Base, 2600 meters deep. Credit: UW/NSF-OOI/CSSF, ROPOS Dive R1742, V14.

An octopus hanging out near primary node PN3A at Axial Base, 2600 meters deep. Credit: UW/NSF-OOI/CSSF,ROPOS Dive 1742, V14.

A close up shot of a Peniagone sea cucumber and two ophiuroids (brittle stars) at Axial Base, 2600 m deep. Photo Credit: NSF-OOI/UW/CSSF, Dive 1742, V14

An action shot of the modified McLane Deep Profiler at the Axial Base site crawling up the mooring wire. The yellow profiler vehicle climbs up and down the mooring wire between the seafloor and the top buoy, collecting oceanographic data on thin layers in the water column. Credit: UW/NSF-OOI/CSSF, Dive 1742, V14.

On August 8, 2014 all Secondary Infratructure at the summit of Axial Seamount was connected to Primary Node PN3B. Here, cable RS03W9 is being plugged into the SP1 port on PN3B. Photo Credit: NSF-OOI/UW/CSSF, Dive 1741; V14.

ROPOS collecting the dummy plugs and parking brakes from plugging infrastructure into primary node PN3B at Axial Caldera. A spider crab can be seen in the background. Photo Credit: NSF-OOI/UW/CSSF, Dive 1741, V14

Cable RS03W6 successfully plugged into SP3 on primary node PN3B at Axial Caldera. Photo Credit: NSF-OOI/UW/CSSF, Dive 1741, V14

ROPOS attempting to plug seafloor cable RS03W8 into SP4 on primary node PN3B at Axial Caldera. Photo Credit: NSF-OOI/UW/CSSF, Dive 1741, V14

Primary Node PN3B at Axial Caldera, along with cable RS03W9. Photo Credit: NSF-OOI/UW/CSSF, Dive 1741, V14

A line attached from the top float of the Axial Base deep profiler mooring to the winch on ROPOS, prior to a recovery to diagnose and repair the mooring connector. Photo Credit: NSF-OOI/UW/CSSF, Dive 1740, V14

ROPOS attaching a line to the flotation sphere at the top of the deep profiler mooring at Axial Base, prior to recovery to fix a connector problem. Photo Credit: NSF-OOI/UW/CSSF, Dive 1740, V14